Compare Bluetti Elite 300 vs EcoFlow Delta 3 Plus Review

Charge retention is excellent: one unit lost only 1% after sitting unplugged for three days.

Two long-term users reported the battery draining in roughly three to four days without meaningful loads, a serious issue for unattended backup.

A promotion bundling a 200W panel at no extra cost was viewed as a strong deal.

EcoFlow-branded solar panels are repeatedly criticized as far more expensive than compatible third-party alternatives.

Stress testing earned exceptional praise for thermal control, suggesting the compact enclosure can manage sustained high power when ventilation is clear.

Multiple tests recorded excessive heat under demanding loads, including temperatures above 125°F, making sustained high-output use the chief concern.

The high-current 12V output is repeatedly praised for RV fridges, pumps, diesel heaters, compressors, and other gear that can overwhelm a standard 10A socket.

There is no 30A outlet, so direct RV hookup and higher-current applications require a different EcoFlow model.

The fixed 3kWh capacity is the most repeated design limitation. Buyers who expect to add batteries later will need a different platform.

Capacity can grow from 1,024Wh to as much as 5kWh using several EcoFlow battery families, making the station unusually flexible.

Two months of testing, including near-30°C conditions, showed consistent output; extra battery drain came from connected cooling equipment working harder.

Warm ambient conditions can slow charging, and one unit overheated under heavy load even in a mild 75°F garage.

The box is sparse, typically including only the mains cable. Solar and vehicle charging leads may require separate purchases.

The included AC and car charging cables cover basic charging, and newer right-angle battery cables improve tight installations.

Typical loads were stable, but one long-duration maximum test caused both AC and USB-C output failures near the limits.

The inverter delivered clean, steady output in interference testing, with no pops, clicks, or erratic behavior.

Controls and ports are generally clean, logical, and easy to reach, with clear labeling that works well in vans, workshops, and low-light settings.

Tiny, low-contrast labels and a few oddly placed controls make the physical interface harder to read than the display itself.

Outlet count depends on region, and the two-socket European configuration drew repeated criticism. The four- or five-outlet versions are more flexible, but total inverter output still limits combined loads.

Six AC outlets are unusually generous for this size and let users connect several household devices at once.

A measured 120V output remained clean under a 1,500W load, supporting confidence in voltage stability.

Normal inverter output is stable, but X-Boost deliberately lowers voltage to run larger resistive loads. That tradeoff can reduce performance and may be unsuitable for sensitive or motor-driven equipment.

Workshop testing showed demanding motor equipment starting and running cleanly when it stayed within the station's limits.

Startup behavior is inconsistent across long-term reports. Some units recover automatically from solar, while others require manual power-on or arrived dead.

The housing feels solid, but one review called the control buttons cheap-looking and criticized their loud click.

Plastics, handles, port covers, and controls generally feel substantial and durable rather than cheap.

A roughly 1.36kW heater ran for about one hour and 47 minutes, a solid result for a sustained mid-to-high load.

A low-average refrigerator load consumed nearly half the battery in just over five hours, largely because of substantial AC inverter idle draw.

The USB-A ports work for legacy devices, but one tester would trade one of them for an additional USB-C connection.

The two USB-A ports deliver more power than typical legacy ports and remain useful for older accessories.

An IP20 rating means there is no meaningful water protection, so outdoor users must keep the station dry and sheltered.

The battery pack is IP65-rated, not the entire power station, so rain and water exposure remain risky.

Standard-style solar connectors were easy to join and worked immediately, avoiding proprietary-cable frustration.

The station uses common XT60i connections, but a solar charging cable is not always included and may need to be purchased separately.

Standby results varied sharply by mode and test, from excellent charge retention to roughly three days with the inverter left on. Output settings matter greatly when idle.

AC inverter idle draw is a recurring weakness and can consume tens of watts continuously, sharply reducing low-load runtime.

After sitting unplugged for three days, the unit lost only 1%, suggesting excellent charge retention while stored.

Some owners say it holds charge well, while others report severe losses over just a few days, suggesting inconsistent standby behavior.

Strong surge behavior helps start refrigerators, tools, and other motor-driven appliances with brief startup spikes.

Solar recovery behavior varies sharply: one unit automatically reactivated its outputs at 5%, while another required manual intervention after depletion.

The 1,200W headline input is generous, but the 60V/22A window can make that ceiling difficult to reach with common panels. Several testers wanted a higher voltage limit.

Two 500W MPPT inputs provide up to 1,000W of solar charging, unusually high for a compact 1kWh station.

The integrated MPPT controller measured about 81% efficiency in one test. That was better than some competitors but still left noticeable solar energy lost as heat.

Both solar controllers reached their 500W caps in testing and handled varied DC sources well, though the 60V ceiling limits some series-panel arrangements.

Power Lifting can help with resistive appliances, but it does not turn the station into a true 4,800W continuous source. One test still capped around the normal 2,400W output.

X-Boost can stretch appliance support beyond the normal rating, which helped with high-wattage cooking gear. Its usefulness depends on the appliance tolerating reduced voltage.

Extended use was generally consistent and trouble-free, with several testers describing the unit as dependable infrastructure rather than a gadget.

Many users remain happy after months or more than a year, yet several detailed reports describe early failures and recurring error codes. Reliability is therefore less consistent than the strong day-to-day performance suggests.

The Elite 300 is best for selected circuits and appliances, not days of whole-home power. Buyers needing scalable household backup should look at a modular system.

This is a device-level 120V backup station, not a native whole-home 240V solution.

At roughly 58-60 pounds, the Elite 300 is heavy despite its compact dimensions. The weight is acceptable for the capacity but remains the most consistent portability complaint.

Most users consider the weight manageable for short carries, although it becomes tiring over distance and is too heavy for backpacking.

The two USB-C ports are capable, but one tester wanted three USB-C ports and fewer legacy USB-A connections.

The two USB-C ports are powerful, although one reviewer wished EcoFlow had included four instead of retaining two USB-A sockets.

The rear exhaust can be blocked because the case lacks protective stand-offs, creating a serious overheating risk if placed flush against a surface.

The station should remain upright with its vents unobstructed; operating it on its side can restrict airflow.

Standard connectors and straightforward setup are positives, but the low voltage ceiling complicates series wiring and can force parallel arrays into the current limit.

The XT60i inputs work with a wide range of EcoFlow and third-party panels, including larger fixed panels, which makes solar setups easier to customize.

Short moves are manageable with the built-in handles, but stairs and repeated carrying become tiring. Several testers preferred a two-person lift.

Well-positioned dual handles make the station straightforward to lift despite the dense battery weight.

The TT-30 placement is thoughtful, but AC outlet spacing varies by region and can be tight enough for large bricks to block neighboring sockets.

Front-facing, rotated AC outlets reduce plug interference and are much easier to use than older rear-outlet EcoFlow designs.

Cooling is mostly effective, including successful heat-soak testing, but one maximum-output test made the fan work harder and more erratically than expected.

Cooling is the most divisive area. Some units stay cool and quiet under strain, while others cycle fans incorrectly and reach unsafe internal temperatures.

Most testers found the screen clear, including outdoors, but a few reported washout or reduced readability in bright sunlight.

Battery level, watts in and out, and time remaining are easy to read, although tiny button labels around the display draw criticism.

The small footprint travels well in vans and vehicles, but nearly 60 pounds makes it transportable rather than truly portable. It is best moved occasionally and then left in place.

At roughly 27–31 pounds, the station is easy to move between a home, vehicle, campsite, or work area and is far more portable than larger backup systems.

The lack of an integrated LED light is a recurring frustration, especially because the heavy unit often requires both hands during an outage.

The absence of an integrated LED is a frequently noted missed opportunity for outages and camping.

Support experiences were split: one reviewer received quick, helpful answers, while another reported no response after flagging test failures.

Support experiences range from responsive and generous to slow, repetitive, and burdensome during multiple replacements.

Advanced protection circuitry adds confidence around a large indoor battery, with safety and stability treated as major strengths.

The management system offers useful charge limits and broad protections, but one owner reported a critical safeguard disabled by default and repeated failures.

The refined footprint fits shelves, vans, and storage spaces more easily than older high-capacity Bluetti models.

The station packs substantial output into a small footprint and can tuck behind furniture or into fitted travel bags.

Charging from a basic vehicle socket is painfully slow, often taking more than a day. Dedicated alternator hardware improves that dramatically to roughly three to six hours.

The optional 800W alternator charger is highly effective and can refill the battery during a drive. The included cigarette-lighter cable is much slower.

Many considered the sale price compelling for 3kWh, fast charging, and RV connectivity. Others found cheaper rivals with larger batteries or expansion, making full-price value more debatable.

Sale prices around $599–$650 make the station highly competitive for its charging speed, ports, UPS function, and expansion options. Value drops if the buyer will never use the Plus-only features.

Surge performance was consistently strong, starting compressors, tools, and appliances that briefly demand far more than their running wattage.

The station handles meaningful startup spikes and brief overloads, but one test found the practical ceiling closer to 2,600W than the advertised 3,600W.

The 3,014Wh battery is the product's defining strength, delivering unusually deep reserves in a body closer to many 2kWh stations.

The 1,024Wh base battery is well matched to camping, networking, and short outages, though some users want more storage for refrigerators or longer off-grid use.

The screen presents useful power-flow, charge, and runtime information without much learning curve. Minor complaints include visual clutter when readings sit at zero.

The large front display is bright, crisp, and information-rich without feeling cluttered.

Multiple computers, chargers, lights, and appliances can run together, but the shared 2,400W ceiling means users must manage combinations of high-draw equipment.

Multiple phones, laptops, monitors, networking devices, and appliances can run together as long as the combined draw stays within the inverter limit.

Most real-world loads ran smoothly, including appliances, computers, RV systems, and workshop tools. A minority of extreme sustained tests exposed shutdowns or limits near maximum output.

Real-world tests with washing machines, pressure washers, refrigerators, air fryers, and other appliances showed confident load handling.

Normal operation is usually quiet enough for apartments, RVs, tents, and recording work. Under heavy load or fast charging, some units became noticeably louder than competing stations.

Most units are exceptionally quiet, even under meaningful loads, making indoor and campsite use comfortable. A recurring minority report rhythmic or loud fan behavior.

Pairing and connection were described as quick and trouble-free, making app control easy to establish.

Bluetooth and Wi-Fi setup is usually quick, but a few users experienced laggy discovery or trouble changing networks while traveling.

The 2,400W inverter is strong enough for most household, RV, office, and workshop loads, though it trails some 3kWh rivals and cannot replace unlimited shore or whole-home power.

The 1,800W inverter is repeatedly praised for running refrigerators, heaters, kitchen appliances, tools, and office equipment without strain. It is best viewed as strong mid-range power rather than whole-home capacity.

The recessed, sturdy handles give a secure grip and make short moves manageable, even though the unit remains too heavy for casual one-handed carrying.

Dual side handles provide a secure, comfortable grip and make the station easier for one person to lift.

Several tests sustained the full rated load without shutdown, though one long-duration test exposed instability close to empty.

The continuous 1,800W rating covers most common household and camping loads, and owners generally find it generous for a unit this size.

Results at the limit were mixed: some tests sustained near-rated output, while another shut down near empty and reviewers discouraged all-day maximum loading.

Near-rated loads generally run for about half an hour, but overheating cut one test short and raises caution for sustained maximum-output use.

The reinforced molded housing feels rugged, resists flex, and appears ready for repeated transport and outdoor use.

Most units have a sturdy casing, though isolated customers received cosmetic defects or early hardware failures.

Pass-through operation worked as claimed, allowing devices to remain powered while the battery recharged.

The station can charge while continuing to power connected devices, and both AC and solar pass-through performed reliably in testing.

Silent charging meaningfully reduces fan noise by lowering input power, useful when the station is near sleeping or working areas.

Quiet charging can reduce input power to keep fan noise extremely low.

Wall charging is fast for a 3kWh battery, usually finishing in roughly 1.5 to 2.75 hours depending on mode and test conditions. One test found it slower than expected, but still respectable for the capacity.

Wall charging consistently finishes in about 55–75 minutes, and the rate can be reduced when quieter operation or battery care matters more.

Solar support turns the unit into a capable off-grid hub for vans, boats, campsites, and outdoor work rather than a battery that only drains down.

Its high solar input, LFP battery, pass-through operation, and broad panel compatibility make it a strong compact solar generator.

The reinforced housing, protected edges, sturdy handles, and solid feel inspire confidence for repeated transport between vans, campsites, workshops, and garages.

The enclosure feels robust, premium, and well assembled, with many owners praising the sturdy construction.

The 12V connections are genuinely useful for fridges, pumps, inflators, and vehicle accessories, especially when paired with the higher-current output.

The regulated car socket is welcomed for camping fridges and vehicle accessories, though one test found noticeable voltage sag at the full 10A load.

The casing resists knocks and scrapes and feels suited to rough vehicle, campsite, and job-site use, though it is not fully ruggedized.

Construction is consistently described as sturdy and premium, with several owners specifically praising durability. The reliability failures reported elsewhere appear to involve internal electronics rather than the outer build.

The 100W and 140W USB-C outputs are well suited to laptops and modern devices, with enough combined power to charge two computers at high speed.

Both USB-C ports can deliver close to 140W simultaneously, making them excellent for modern laptops and other high-draw devices.

The high-current DC connections are useful, but results were not flawless. One sustained USB-C/DC test ended in an over-current shutdown, while other testers reported strong 12V performance.

The DC section is useful for basic accessories, but the lack of a higher-power 150W output can be limiting for devices such as diesel heaters.

It is highly effective for selected essentials such as refrigerators, routers, lights, computers, and kitchen appliances during short or medium outages.

The station is highly effective for refrigerators, internet gear, lights, TVs, CPAP machines, and office equipment during outages. It is not a substitute for a large split-phase whole-home system.

Protection circuits generally shut the unit down cleanly when pushed beyond its limits and were easy to reset afterward.

The inverter shuts down safely beyond its limits and often provides a brief margin to remove an accidental overload.

The compact cube fits closets, van compartments, shelves, and under-desk spaces better than many 3kWh alternatives.

Its compact shape stores easily on shelves, behind furniture, or in vehicle cargo areas.

Measured usable output was excellent, commonly around 89-94% in favorable tests and unusually high for a station this size.

Capacity testing recovered roughly 87–88% of the rated energy, a strong result for AC and DC use.

Silent charging produced a strong measured 88.5% input efficiency, using less energy than the faster modes.

Recharge efficiency is generally strong, with measured results around the high-80% to low-90% range.

The large battery delivered long practical runtimes, from hours on cooking and computing loads to days on refrigerators and lighter essentials.

Runtime is strong for networking gear, refrigerators, CPAP machines, and camping electronics, with many owners reporting hours of useful backup. Heavy loads and high inverter idle draw shorten endurance quickly.

For a 3kWh station, the Elite 300 is exceptionally compact and often compared in size with 2kWh models. A few testers still found it chunky rather than truly small.

The narrow, roughly desktop-tower-sized body fits well in vehicles, closets, RVs, and crowded workspaces.

The mix of AC, USB, 12V, high-current DC, and RV connections covers most home, van, and mobile-work needs without extra splitters.

Six AC outlets, high-power USB-C, USB-A, 12V, and DC barrel outputs cover a broad range of home, camping, and worksite devices.

Scheduling and weather-aware routines can wake or cycle outputs automatically, adding useful hands-off control for backup and remote setups.

Smart Generator integration can start and stop charging automatically according to battery thresholds, improving unattended backup operation.

Combining AC with solar, or alternator with solar, can shorten recharge time and makes continuous travel or off-grid use more practical.

AC and solar can be combined, and the two DC inputs allow flexible mixes of solar, vehicle, or battery sources.

Maximum charging or heavy output brings audible fan noise around 49-50dB. It remains tolerable, but it is not silent.

Full-load sound ranges from impressively quiet to distracting, depending on fan behavior and the individual unit.

Real-time input and output data makes appliance draw and solar production easy to understand from the app.

The display and app provide clear live readings for total and per-port power flow.

Rapid recharging is a core strength, particularly for vanlife and travel where the station can be restored between daily uses.

Fast recharge is one of the clearest strengths, with many tests and owners reaching full charge in roughly an hour.

App controls make it easy to switch outputs and adjust settings from bed, another room, or a remote installation.

Users can switch output groups, adjust charging, set battery limits, and manage generator or alternator behavior from the app.

Detailed remote readouts show output, state of charge, and estimated runtime without requiring access to the front panel.

The app clearly shows battery level, charging rate, output draw, temperatures, and estimated runtime from anywhere the station has internet access.

Operation is straightforward: connect a device, select AC or DC output, and monitor the load. The simple layout and app reduce the learning curve for first-time users.

Physical operation is simple, while advanced app settings offer depth for owners who want more control.

Measured AC efficiency was consistently strong, often around 86-94%, with several testers placing it above average or among the best large stations they had measured.

Measured discharge efficiency generally lands in the mid-to-high 80% range, which is good for a 1kWh station. One overheating test produced a merely average result.

With sufficient panels and good sun, solar charging is practical and can restore the battery in roughly three to four hours. Smaller arrays still meaningfully extend outdoor runtime.

Dual solar inputs can recharge the station very quickly under a strong array, but a few off-grid users reported slow charging or failure to restart after depletion.

The all-in-one design avoids complex inverter and battery wiring. Most setups were described as plug-and-play, with app pairing and solar connections taking only minutes.

Most users can unpack, connect, and begin using the station or app within minutes.

Long cycle life makes the pack feel suitable for daily use rather than occasional emergencies, with estimates extending beyond 16 years at one cycle per day.

Long-life LFP cells and adjustable charge limits make the station attractive for daily UPS or solar-buffer use.

Kettles, toasters, microwaves, air fryers, heaters, tools, and even some welders ran successfully within the 2,400W limit. Industrial motors and simultaneous heavy loads can still trip it.

The station can run many 1,500–1,800W appliances and some higher-wattage resistive loads through X-Boost. Continuous heavy-duty use is less convincing because of cooling concerns reported by several reviewers.

The display and app provide useful estimates of remaining runtime, helping users judge whether a load can stay connected.

The time estimate is useful for planning, though it can shift substantially when cycling appliances such as refrigerators turn on and off.

LiFePO4 cells earn strong approval for thermal stability, safety, and durability compared with older lithium-ion chemistries.

The LiFePO4 chemistry is viewed as a safe, durable foundation for frequent cycling and long-term ownership.

The app is generally considered feature-rich, clear, and easy to use for monitoring, scheduling, UPS settings, and output control. One comparison found it slower and laggier than EcoFlow's app.

The app is one of the product’s biggest strengths, offering deep controls, schedules, Storm Guard, charge limits, and remote monitoring. Network issues, missing automations, and occasional lag keep the experience from being universally excellent.

The Charger 2 and compatible solar hardware give van and boat users practical ways to add alternator charging and evolve their setup over time.

Backward battery compatibility and Smart Generator or alternator options are major advantages, though a single shared expansion port prevents some combinations.

In UPS and background use, the station stays quiet enough to sit near desks, routers, and living spaces without becoming distracting.

Many owners barely hear the unit at low loads, but several reviewers found the fans cycling every minute during UPS use.

The five-year warranty is a strong match for the long-cycle battery and adds confidence for frequent use.

The five-year warranty is valuable and replacements were often approved, though packaging, shipping, and refurbished-unit offers caused frustration.

UPS performance is a standout strength: transitions were consistently fast and reliable across computers, routers, NAS devices, printers, and home-office equipment.

The under-10ms transfer works well for computers, networking equipment, refrigerators, printers, and home offices, with connected devices staying online during outages.

The 6,000-cycle rating is exceptional for the category and translates to many years of frequent use before capacity falls to 80%.

The 4,000-cycle rating is a major strength and supports many years of regular charging before capacity falls to 80%.

Transfer to battery power is exceptionally quick, with measured or reported switching around 9-20ms. Routers, computers, printers, and networking gear generally stayed online without rebooting.

Measured transfer times near 8–10ms met the specification and prevented visible interruptions on sensitive electronics.

A standard, replaceable AC cord is a welcome improvement over proprietary cables, making replacements inexpensive and easy to source.

The built-in AC charger eliminates a bulky brick, while the compact right-angle expansion cable is a welcome refinement.

Testing and specifications support clean sine-wave power suitable for sensitive electronics, computers, and production equipment.

Testing showed a clean 120V, 60Hz sine wave, making the station suitable for computers, audio gear, and other sensitive electronics.

Local Bluetooth control connected without trouble in testing and provides dependable access when Wi-Fi is unavailable.

Bluetooth provides dependable local control when no Wi-Fi network is available, especially useful at campsites and on the road.

Detailed logging makes it easier to understand hourly consumption and compare solar or vehicle charging against actual loads.

Historical graphs, electricity-rate settings, and live draw data help owners understand consumption and use stored solar more strategically.

Testing points to a well-built inverter with high usable capacity, strong efficiency, and dependable output across normal loads.

The inverter earns strong marks for clean power, solid efficiency, quiet operation, and the ability to sustain its rated load.

The LiFePO4 pack is strongly favored for safety, stability, and long service life under frequent use.

Owners value the LFP pack for thermal stability, long cycle life, and greater peace of mind than older lead-acid or NMC alternatives.

Long battery life produces very low estimated lifetime storage costs, strengthening the case for regular rather than emergency-only use.

Using surplus daytime solar and time-of-use schedules can reduce grid purchases and improve payback.

Pass-through and backup tests showed clean, stable power without voltage problems for sensitive office and production equipment.

Computers, networking equipment, appliances, and workshop tools continued operating smoothly without dips or interruptions.

The 30-amp connection can feed an RV or suitable transfer-switch setup without awkward adapter arrangements.

Users successfully powered selected home and trailer circuits through transfer or changeover switches, provided the setup stayed within the station’s 120V limits.

Wi-Fi setup worked smoothly and extends monitoring and control beyond local Bluetooth range.

Wi-Fi enables remote monitoring, control, firmware updates, and smart routines from outside Bluetooth range.

The removable fan filter and serviceable rear cover make dust cleanup unusually easy, a valuable detail for campsites, garages, and job sites.

Most routine tests tracked remaining charge plausibly, but two failure cases showed abrupt or inaccurate percentage behavior.

Most owners report dependable performance, but a notable group experienced dead-on-arrival units, cell imbalance, unexplained drain, or repeated replacements.

One long-term off-grid user saw poor behavior in winter, while also noting that similar failures occurred in warmer seasons.

The sleek silver-and-dark finish, clean display, and compact proportions look modern enough for visible indoor use.

IP65 protection around the battery pack helps in dusty camping and worksite environments, though ports and electronics are not fully sealed.

ECO mode can shut outputs down after a load finishes, reducing unnecessary drain. It should be disabled for very low-power medical devices that could be mistaken for no load.

Because it is battery-powered, the station can run indoors without gasoline fumes or exhaust.

Extra batteries, alternator charging, solar, and Smart Generator support let the system grow from a simple portable station into a larger backup setup.

Updates are delivered conveniently through the app, and some reviewers expect software to fix fan behavior. Long-term users also report recurring errors that reboots did not permanently solve.

Measured output held a clean 60Hz waveform under test, supporting dependable operation for sensitive electronics.

Compatible generators can restore the battery in about an hour, giving users a fast fallback when solar or grid power is unavailable.

The casing handles knocks and scrapes well, adding confidence for repeated loading, vehicle travel, and rough job-site use.

Basic guidance is clear for many users, but important timeout and 12V shutdown settings are not emphasized enough.

With no fuel, oil, spark plug, or exhaust system, routine upkeep is minimal.

The station is essentially maintenance-free beyond sensible charging, storage, and firmware care.

The protection system monitors temperature, but several tests still reached troubling internal heat before shutdown.

Voltage monitoring is part of the station’s broad safety package.

The broad consensus is highly positive: fast charging, strong output, quiet operation, a capable app, and flexible expansion make it a favorite midsize station. Fan control, idle draw, and a cluster of reliability failures prevent an unqualified recommendation.

The station cannot be paired with another unit to create 240V split-phase output, limiting larger backup installations.

The app can turn the station on or off remotely, useful when it sits in a closet, vehicle, or hard-to-reach installation.

Serious failures generally led to replacement or refund rather than a successful repair, which is concerning once warranty coverage ends.

Direct RV hookup is a major convenience, avoiding adapters or custom wiring for common camper and van setups.

The station combines LFP chemistry with extensive current, voltage, temperature, and circuit protections.

Built-in electrical safeguards are designed to stop faults before they cause fire or equipment damage.

Automatic timeouts and failure to wake for solar charging caused serious problems in unattended fridge and off-grid setups.

AC charge times are generally accurate, but surge claims and some ideal-condition figures proved optimistic in testing.

The built-in TT-30 is one of the most consistently praised additions. Its placement makes direct RV connection easy without blocking nearby AC outlets on the U.S. model.

The protected battery pack and sturdy casing add confidence for outdoor use, but the complete station should still be sheltered.

There are no wheels or trolley handle, so a heavier wheeled competitor can actually be easier to move across level ground.

There is no MagSafe or Qi charging pad, a minor omission for users who want a cable-free phone spot.